Installing Pci Board - NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual

8-32 System Upgrade

Installing PCI Board

Follow the procedure below to install the board to be connected to the PCI board slot.
TIPS:
To install the PCI board, make sure the shape of the board connector matches with the shape of
the PCI board slot connector.
1.
Remove the CPU/IO module referring to the page 8-12.
The following steps explain how to install a PCI board on the PCI board slot (PCI-X slot 2,
PCI-X slot 3) of the riser card.
Go to step 10 to install a PCI board on the PCI board slot (PCI-X slot 1).
2.
Disconnect the cable from the connector of the riser card.
3.
Loose a fixed screws on the PCI stopper on the rear side of the device, and remove the PCI
stopper.
4.
Loose the 3 fixed screws on the PCI bracket on the rear
side of the device, and remove the PCI bracket.