NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 74

IMPORTANT:
If RDR is specified to a disk which contains the system partition or partition which cannot
be unmounted, the following pop-up message appears. If you click [Yes], the system is
restarted in two minutes automatically. Go on to 5. when the system is restarted.
5.
Insert a disk to set duplex configuration into the corresponding slot.
(In this example, a disk is inserted into the Slot 2 of the PCI module 1.)
IMPORTANT:
When a disk is inserted, a popup window asking for rebooting the system may be
displayed, but there is no need to reboot it. Select [No] and close the popup
window.
For a disk to be inserted, use a new or physically formatted disk which has the
same capacity as the synchronization source. If such a disk is not used, disks are
not duplicated successfully.
For physical format, see "SAS BIOS – Adaptec SAS/SATA Configuration Utility –" in
Chapter 4 "System Configuration" and perform Format Disk with Disk Utilities. When
performing Format Disk, on BIOS Setup Utility, click [Server], [Monitoring
Configuration] and disable [Option ROM Scan Monitoring]. For how to set up, see
"SYSTEM BIOS – SETUP –" on Chapter 4 "System Configuration."
Windows Setup and Operation 3-7