NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 410

Express5800 series
Hide thumbs Also See for Express5800/320Fd-MR N8800-123F, EXP320K:
Table of Contents

Advertisement

Exclamation mark "!" appears to "VGA Display Controller" under the "non-Plug and
Play device" when changed the setting to show hidden devices in menu in the
Device Manager:
This has to do with the server specification and there is no effect to the operation.
Exclamation mark "!" appears to "VGA Display Controller" since OS Standard VGA
driver is not activated in the server.
Warning message appears in POST after implementing ft Remote Management Card:
Did you set "Initialize Remote Management Card"?
H/W Configuration of BMC is corrupted.
!! Update BMC H/W Configuration by configuration tool!!
!! Refer to BMC Configuration manual !!
If the message above appears, press F1 key or wait for a while. Then POST
proceeds. Insert NEC EXPRESSBUILDER DVD attached to the server to the
DVD-ROM drive to start NEC EXPRESSBUILDER. Select [Tools] - [Initialize
Remote Management Card] from its main menu to write the sensor information
specific to the server to the card.
A CPU/IO module cannot be integrated:
When a componet fails and is reintegrated, the following message may be recorded
to the system event log and the process is stopped. Such event indicates that the
component's MTBF is below the threshold and it is judged that repair is necessary.
Thus the reintegration process cannot be completed. Generally replacement of the
component will be required, so contact your sales representative. If reintegraating the
component without repair is required for some reason, consult your sales agent. It is
possible to perform reintegration forcefully.
Source:
ID:
Description:
When you integrate a PCI module when exchanging, starting and diagnosing the PCI
module, follwing events may be recorded on [System] in [Event Viewer], and the
duplex process may fail:
Source:
ID:
Description:
srabid
16395
x is now STATE BROKEN / REASON_BELLOW_MTBF ("x" is a
device number.)
srabid
16474
Diagnostics failure of XX: 'IO GbEnet OUI Verification 1, D821'
(Ftn=xxxx Info=xxxx,xxxx).
Troubleshooting 7-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/320fd-lr n8800-122f, exp320j

Table of Contents