NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 118

4-12 System Configuration
I/O Device Configuration
When you select "I/O Device Configuration" in the Advanced menu, the following screen appears.
If you select a menu with the "►" mark and press Enter, its submenu appears.
Main Advanced
I/O Device Configuration
Serial Port1:
Base I/O address:
Serial Port 1 Connection: [Serial Connector]
Serial Port2:
Base I/O address:
Serial Port2 Sharing
Keyboard Features:
NumLock:
F1 Help ↑↓ Select Item
Esc Exit ←→ Select Menu
Refer to the table below for information on options.
Option
Serial Port 1
Base I/O address
Serial Port 1 Connection
Serial Port 2
Base I/O address
Serial Port 2 Sharing
ftServer Setup
Security Server
[Enabled]
[3F8/IRQ 4]
[Enabled]
[2F8/IRQ 3]
[Disabled]
[Off]
-/+ Change Values
Enter Select
Parameter Description
Specify whether or not to enable Serial Port 1.
Enabled
[Disabled]
Auto
Specify the I/O address and IRQ of Serial Port 1.
[3F8/IRQ4]
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Specify Serial Connector or Internal Modem for
[Serial
Serial Port 1 connection.
Connector]
Internal
Modem
Specify whether or not to enable Serial Port 2.
Enabled
[Disabled]
Auto
Specify the I/O address and IRQ of Serial Port 2.
3F8/IRQ4
[2F8/IRQ3]
3E8/IRQ4
2E8/IRQ3
Specify whether or not to use Serial Port 2 in
Enabled
BMC.
[Disabled]
Boot Exit
Item Specific Help
Configure Serial Port 1
using options:
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
NOTE:
Serial Port 1 may not
be routed to the Modem
if a VTM is present.
F9 Setup Defaults
Sub Menu F10 Save and Exit