Removing Pci Board; Replacing Pci Board - NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual
Express5800 series
Hide thumbs
Also See for Express5800/320Fd-MR N8800-123F, EXP320K:
- User manual (504 pages) ,
- User manual (254 pages) ,
- User manual (116 pages)
Table of Contents
Advertisement
8-36 System Upgrade
Removing PCI Board
To remove PCI board card, follow the reverse procedure of the installation and install the expansion
slot cover.
Replacing PCI Board
Follow the procedure below to replace the failed PCI board.
1.
Check the failed board from the event log.
2.
Remove the CPU/IO module referring to the page 8-12.
3.
Remove the PCI bracket, then remove the PCI board.
4.
Replace the board and fasten it.
5.
Install the CPU/IO module referring to the page 8-15.
6.
Connect the network cable and cables for PCI boards.
7.
The installed CPU/IO module will start automatically.
8.
Confirm that the PCI board is correctly recognized by POST and OS.
Advertisement
Table of Contents
Troubleshooting
