Installing 3.5-inch Hard Disk Drive
Follow the procedure below to install the hard disk. A hard disk may be installed in another slot in the
same procedure.
IMPORTANT:
Refer to "ANTI-STATIC MEASURES" and "PREPARING YOUR SYSTEM FOR
UPGRADE" before starting installing or removing options.
You must mount two HDDs that form dual disk configuration before starting Windows Server
2003.
1.
Shut down Windows Server 2003. The system turns off automatically.
2.
Remove the front bezel.
3.
Identify the slot to which you want to install the hard disk drive.
Install a hard disk in an empty slot in the group, starting from the lower slot. (In the order of slot
1, slot 2, and slot 3 in CPU/IO module 0 and 1)
4.
Pull the lever toward you while pushing the green
lock of the dummy tray to the left.
5.
Hold the handle of the dummy tray to remove the
tray.
IMPORTANT:
Keep and store the dummy tray with care.
TIPS:
The lever on the slot 3 may be hard to pull toward
This does not become a problem for proper
operation.
6.
Unlock the hard disk to be added.
System Upgrade 8-7
you.