NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 115

Available options in the Main and descriptions are listed below.
Option
System Time
System Date
CPU Speed
Physical CPUs
System Memory
Extended Memory
Cache Ram
SATA AHCI
Enable
IMPORTANT:
Check and adjust the system clock before operation in the following conditions.
- After transporting the equipment
- After storing the equipment
- After the equipment halt under the conditions which is out of the guranteed environment
conditions (Temperature: 10 to 35°C, Humidity: 20 to 80%).
Check the system clock once in a month. It is recommended to operate the system clock using a
time server (NTP server) if it is installed on the system which requires high level of time accuracy.
If the system clock goes out of alignment remarkably as time goes by, though the system clock
adjustment is performed, contact your sales agent.
Do not change "SATA AHCI" as "Enabled." The BIOS version may become unable to display on
the ft Server Utility.
Parameter
HH:MM:SS
MM/DD/YYYY
XXXX MHz
X
XXXX KB
XXXX MB
XXXX KB
[Disabled]
Enabled
Description
Specify the system time.
Specify the system date.
Displays the processor clock frequency.
Displays the number of processor installed.
Displays the size of system memory.
Displays the size of extended memory.
Displays the capacity of LS cache.
Specify whether or not to enable AHCI mode.
[
System Configuration 4-9
] factory default