Problems Sending Faxes; Cannot Send A Fax - Canon PIXM MX300 Series User Manual

Problems Sending Faxes

Cannot Send a Fax

Cause
The machine is not
powered on.
The In Use/
Memory lamp is
flashing.
The telephone line is
connected to the
External Device Jack.
The telephone line
type is not set
correctly.
DIAL TONE
DETECT is set to
ON.
The fax number is not
correctly registered in
a speed dial.
Action
You cannot send faxes if the power is
turned off. Press the ON/OFF button to turn
the power on.
After a power failure or disconnecting of
the power cord, press the ON/OFF button to
turn the power on.
Another document is being sent from memory.
Wait until the machine finishes sending it.
Reconnect to the Telephone Line Jack. Refer to
your setup sheet.
If you still cannot send a fax, there is a problem
with the telephone line. Contact your telephone
company and the manufacturer of your terminal
adapter or telephone adapter.
If the telephone line type is not set correctly, you
will not be able to send faxes, but will still be able
to receive them. In this case, check the
telephone line type setting and change it as
necessary. See Setting the Telephone Line
Type.
Resend the fax after a while. If you still cannot
send the fax, set DIAL TONE DETECT to
OFF.
Make sure that the fax number is correctly
registered when speed dialing. See
Coded Speed Dialing.
201
Registering