Load The Paper - Canon PIXM MX300 Series User Manual

any other type of paper. See
Note
If the corners or edges of the paper are smudged, try to print with the
Paper Thickness Lever set to the right. It may improve print quality.
Reset the Paper Thickness Lever to the left when you finish printing.
See The position of the Paper Thickness
3

Load the paper.

* Do not load higher than the Load Limit Mark (A).
Load the paper in the Rear Tray with the print side facing UP.
(1)
Align the paper stack against the right side of the Rear Tray.
(2)
Pinch the Paper Guide and slide it against the left side of the paper stack.
(3)
4
Specify the page size and media type settings according to the loaded
paper.
Compatible Media Types.
Lever.
26