Table of Contents
Advertisement
Put your finger in the rounded indent beside the Paper Output Tray and open it gently.
(1)
Open up and set the Output Tray Extension completely by pressing down the hollow
(2)
on its front side.
3
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise,
and then unfold the paper.
4
Load this and only this sheet of paper in the Rear Tray with the open
side to the front.
Set the Paper Thickness Lever to the left. See
Load the paper after unfolding it.
(A)
5
Perform bottom plate cleaning.
Press the Menu button repeatedly until MAINTENANCE appears.
(1)
Press the
(2)
button.
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate
Cleaning again.
If the problem is not resolved after performing Bottom Plate Cleaning twice, the protrusions
inside the machine may be stained. Clean them according to instructions. See
Protrusions Inside the
or
button to select BOTTOM CLEANING, then press the OK
Machine.
Paper Thickness
136
Lever.
Cleaning the
Advertisement
Table of Contents
