Canon PIXM MX300 Series User Manual page 92

Table of Contents

Advertisement

Note
Set your answering machine to answering mode and adjust it as
follows:
- The entire message should be no longer than 15 seconds.
- In the message, tell your callers how to send a fax.
The machine can be set to receive faxes automatically after the
telephone rings for a specified length of time. Set MAN/AUTO
SWITCH in RX SETTINGS under FAX SETTINGS to ON, and
then specify the automatic reception start time. See
SWITCH.
If you have subscribed to Duplex Ringing service in Hong Kong, the
machine will receive faxes automatically even if you set the receiving
mode of the machine to TEL PRIORITY MODE.
If You Are Using a Single Telephone Line for Faxes and Voice Calls and
Want to Receive Faxes Automatically:
Select FAX PRIORITY MODE.
Incoming call
(A)
Voice call: The machine will ring. Pick up the handset, then press the Stop/Reset button
(B)
to answer the call.
MAN/AUTO
92

Advertisement

Table of Contents
loading

Table of Contents