Canon PIXM MX300 Series User Manual page 74

1
Press the
letter mode (:a), or number mode (:1).
You can see what mode you are in by the character displayed on the top right corner of the
LCD.
2
Press the Numeric buttons to enter a character.
Press the button repeatedly until the character you want appears.
To enter a character that is assigned to the same button as the
previous entry:
Press the Numeric button, press the
(1)
again.
To enter a space:
Press the
(1)
In number mode, press the
To delete a character:
Press the
(1)
To delete an entire entry:
Press and hold the
(1)
Entering the Date and Time
Note
When the machine is connected to a computer with the MP Drivers
installed, the date and time setting will be copied from the computer to
the machine. As long as the date and time is set accurately on your
computer, you do not need to set it on the machine.
If you disconnect the power cord or when there is a power failure, the
date and time setting on the machine will be reset. When you connect
the machine to a computer with the MP Drivers installed, the setting will
be copied to the machine once again.
1
Press the FAX button, then press the Menu button.
button to switch to uppercase letter mode (:A), lowercase
button two times.
button once.
button.
button.
button, then press the same Numeric button
74