Table of Contents
Advertisement
Installation does not
start automatically
when the Setup CD-
ROM is inserted into
your computer's disc
drive.
Installation procedure
not followed correctly.
Click Start then Computer.
(1)
In Windows XP, Click Start then My
Computer.
In Windows 2000, double-click the My
Computer icon on the desktop.
Double-click the CD-ROM icon
(2)
the displayed window.
Note
To use the Run command to start the setup
program, specify your disc drive and then the
name of the setup program, MSETUP4.EXE.
The drive letter of the disc drive depends on your
computer.
Double-click the CD-ROM icon on your desktop
to start installation.
If the CD-ROM icon is not displayed, restart your
computer.
If the CD-ROM icon is still not displayed, try
different disks and see if they are displayed. If
other disks are displayed, there is a problem with
the Setup CD-ROM. Contact your Canon
service representative.
Follow the procedure described in your setup
sheet for proper installation.
If the MP Drivers were not installed correctly,
uninstall the MP Drivers, restart your computer,
and then reinstall the MP Drivers. Refer to the
PC Printing Guide on-screen manual.
Note
If the installer was forced to be terminated due to
a Windows error, the system may be in an
unstable condition and you may not be able to
install the MP Drivers. Restart your computer
before reinstalling.
159
on
Advertisement
Table of Contents
