Canon PIXM MX300 Series User Manual page 181

FINE Cartridge Holder Does Not Move to the Left
Note
Opening the Scanning Unit (Printer Cover) while printing moves the FINE Cartridge
Holder to the right. Close the Scanning Unit (Printer Cover), and reopen it after printing
finishes.
Cause
The machine is not
ready.
An error has occurred
on the machine.
The Scanning Unit
(Printer Cover) has
been left open for 10
minutes or longer.
up menu and then click Detailed
Setting.
Drag the slide bar to set Print Quality
(3)
to Fast.
Action
Check if the Power lamp is lit green.
The FINE Cartridge Holder will not move unless
the power is on. If the Power lamp is off, close
the Scanning Unit (Printer Cover) and turn the
machine on.
While the Power lamp is flashing green, the
machine is initializing. Wait until the Power
lamp stops flashing and remains lit green, and
then open the Scanning Unit (Printer Cover)
again.
Close the Scanning Unit (Printer Cover), follow
the directions displayed in the error message to
resolve the error, and then reopen it. See
Error Message Is Displayed on the
If the Scanning Unit (Printer Cover) is left open
for more than 10 minutes, the FINE Cartridge
Holder moves to the right to prevent the Print
Head from drying out. Close and reopen the
Scanning Unit (Printer Cover) to return the FINE
Cartridge Holder to the left.
181
An
LCD.