Table of Contents
Advertisement
The machine is not
ready.
The machine is not
connected properly.
Your machine is not
selected in the printer
driver.
Check if the Power lamp is lit green.
If the Power lamp is off, turn the machine on.
While the Power lamp is flashing green, the
machine is initializing. Wait until the Power
lamp stops flashing and remains lit green.
Note
When printing large data such as a photo or
graphics, it may take longer to start printing.
Make sure that the USB cable is securely
plugged in to the machine and the computer.
If you are using a relay device such as a
USB hub, disconnect it, connect the machine
directly to the computer, and try printing
again. If printing starts normally, there is a
problem with the relay device.
Consult the reseller of the relay device for
details.
There could also be a problem with the
USB cable. Replace the USB cable and try
printing again.
The machine will not print properly if you are
using a driver for a different printer.
In Windows, make sure that Canon XXX
Printer (where "XXX" is your machine's name)
is selected in the Print dialog box.
In Macintosh, make sure that your machine's
name is selected in Printer in the Print dialog
box.
Note
To make your machine the one selected by
default, select Set as Default Printer
(Windows) or Make Default (Macintosh).
177
Advertisement
Table of Contents
