Canon PIXM MX300 Series User Manual page 151

UNSUPPORTED USB
HUB
CHECK PRINTER
SCANNER ERROR
LOAD PAPER
PAPER JAMMED
CHANGE PAPER TO
COVER IS OPEN
manual.
If the error is still not resolved, check if you can
print another photograph.
If a PictBridge compliant device is connected via
a USB hub, remove the hub and connect it
directly to the machine.
Turn off the machine, and unplug the power cord
of the machine from the power supply. After a
while, plug the power cord of the machine back
in, and then turn on the machine. If the same
error occurs, contact your Canon service
representative.
Make sure that the protective material is
removed from the FINE Cartridge Holder, then
turn the machine off and back on again. If the
problem is not resolved, contact your Canon
service representative.
Reload the paper correctly and press the OK
button.
Note
Pressing the Stop/Reset button also enables
you to resolve the error, when sending faxes
before printing out received data. After you press
the Stop/Reset button to resolve the error,
ensure to press the FAX button in order to print
out data remained in memory.
If paper has jammed in the machine, clear the
jam, reload the paper in the machine correctly
and then press the OK button.
The paper size setting is set to a size other than
A4, Letter or Legal.
Set the paper size setting to A4, Letter or Legal
and load paper of the same size.
You opened the Scanning Unit (Printer Cover)
during an operation.
Return the Scanning Unit (Printer Cover) to its
original position.
151