Table of Contents
Advertisement
The machine is not
ready.
Machine is not
connected properly.
Your machine is not
selected in Printer
on the Print dialog
box.
Confirm that the Power lamp is lit green.
If the Power lamp is off, turn the machine on.
While the Power lamp is flashing green, the
machine is initializing. Wait until the Power
lamp stops flashing and remains lit green.
If the Alarm lamp is lit orange, an error may
have occurred on the machine. For details on
how to resolve the error, see
Is Displayed on the
LCD.
Make sure that the USB cable is securely
plugged in to the machine and the computer.
If you are using a relay device such as a
USB hub, disconnect it, connect the machine
directly to the computer, and try printing
again. If printing starts normally, there is a
problem with the relay device.
Consult the reseller of the relay device for
details.
There could also be a problem with the
USB cable. Replace the USB cable and try
printing again.
Select your machine's name in Printer on the
Print dialog box.
If your machine's name does not appear in
Printer, follow the procedure below to check
that the driver for your machine is installed to
your computer.
Select Print & Fax Preferences in
(1)
Printer.
In Mac OS X v.10.2.8 or 10.3.x, select Edit
Printer List in Printer.
Check that your machine's name is
(2)
displayed in the list of printers and that the
check box is selected.
In Mac OS X v.10.2.8, check that your machine's
name is displayed in Printer List.
If your machine's name is not displayed,
(3)
click Add(+) to add the machine.
If you cannot add the machine, follow the
procedure described in your setup sheet to
190
An Error Message
Advertisement
Table of Contents
