Sf 51 And 54 Control Panel For Fastmig Kms - Kemppi FastMig MXF 63 Operating Instructions Manual

5.3

SF 51 and 54 control panel for FastMig KMS

For full operational descriptions for SF 51 and SF 54 control panels refer to the digital storage
device delivered with the product.
1.
SETUP
MMA
MIG
MMA
9.
1. ON/OFF button
2. a) Wire feed speed/welding current display
b) Display of selected SETUP entry
3. MIG dynamics/MMA Arc Force selection
4. Selection of air/liquid cooled MIG gun
5. Gas test
6. Weld data: Last used welding parameters shown in displays
7. Wire inch
8. a) Welding voltage display
b) Adjustable parameters display
9. Selection of MIG/MMA process
10. a) Selection of switching logic: 2T/4T
b) Long press: Setting the basic parameters (SETUP)
11. a) Adjustment of wire feed speed
b) Adjustment of MMA current
c) Selection of SETUP parameter
12. a) Adjustment of welding voltage
b) Adjustment of MIG dynamics or MMA Arc Force
c) Adjustment of SETUP parameters
13. Manual control/remote control unit selection
© Kemppi Oy / 1515
2. 3. 4. 5. 6.
weld
ARC FORCE
data
DYNAMICS
GAS TEST
m / min
A
4T
2T
10. 11.
7.
WIRE INCH
8.
V
U
PANEL
SF 51
12. 13.
EN
23