Sf 52W And 53W Control Panel For Fastmig Kms - Kemppi FastMig MXF 63 Operating Instructions Manual

5.4

SF 52W and 53W control panel for FastMig KMS

For full operational descriptions for SF 52W and SF 53W control panels refer to the digital
storage device delivered with the product.
10.
SELECT
EN
9.
SYNERGIC
PROGRAM
1. ON/OFF button
2. a) Wire feed speed/welding current/sheet thickness display
b) Selected SETUP entry display
3. MIG dynamics/MMA Arc Force/Wise Forming Pulse selection **
4. Display of air/liquid cooled MIG gun (selection from setup)
5. Gas test
6. Weld data: Last used welding parameters shown in displays
7. Wire inch
8. a) Welding voltage display
b) Selection display for adjustable parameters
9. a) 1-MIG/WISE synergic welding program check **
b) 1-MIG/WISE synergic welding program selection (long press) **
10. a) Selection of switching logic: 2T/4T/4T Minilog *
b) Long press: Setting the basic parameters (SETUP)
11. Selection of welding process MIG,1-MIG, MMA, WISE **
12. Selection of additional MIG functions/WisePenetration ** (long press)
13. a) Adjustment of wire feed speed
b) Adjustment of welding power setting 1-MIG/WiseRoot/WiseThin **
c) Adjustment of MMA current
d) Selection of SETUP parameter
e) Selection of 1-MIG/WiseRoot/WiseThin welding program (material group) **
14. Memory channels, storage of MIG parameters
15. a) Welding voltage adjustment
b) Adjustment of length of welding arc (1-MIG)
c) Adjustment of MIG dynamics
d) Adjustment of SETUP parameter
e) Selection of 1-MIG/WiseRoot/WiseThin welding program (program number) **
f ) WiseRoot and WiseThin base current adjustment
16. Manual control/remote control unit selection
*) Minilog is not included in standard delivery
**) Wise products are available as optional welding process solutions. Not included in the
standard delivery. Please visit www.kemppi.com or Kemppi Datastore.
24
FastMig MXF 63, 65, 67
2. 1. 3. 4.
5.
quick
ARC FORCE
setup
DYNAMICS
GAS TEST
m/min
mm
A
/ MINILOG
POWER
4T
2T
SETUP
MEMORY
MMA
WISE SET
1-MIG
ON
MIG
MMA PEN
12.
11.
7.
6.
weld
data
WIRE INCH
8.
V
15.
U
13.
SET
SAVE
PANEL
CH
ch clear ch remote
SF 53W
14. 16.