Table of Contents
Advertisement
About these service instructions
1
1.1 Scope of application of the instructions
These instructions describe setting and maintenance work on the sewing
machines 610 and 630. They apply to all subclasses.
The Operating Instructions describe the intended use and the set-up.
1.2 Declaration of conformity
The machine complies with the European regulations specified in the dec-
laration of conformity or in the installation declaration.
1.3 Applicable documentation
The device contains built-in components from other manufacturers, e.g.
drive motors. The respective manufacturers have carried out hazard as-
sessments for these purchased parts and confirmed compliance of the de-
sign with the applicable European and national regulations. The intended
use of the built-in components is described in the corresponding manuals
of the manufacturers.
1.4 Damage during transport
Dürkopp Adler cannot be held liable for any damage during transport.
Check the delivered product immediately after receiving it. Report any
damage to the last transport manager. This also applies if the packaging
is not damaged.
Keep the machines, devices and packaging material in the condition they
were at the time when the damage was identified. This secures any claims
towards the transport company.
Report all other complaints to Dürkopp Adler immediately after receiving
the product.
Service Instructions 610/630 - 00.0 - 10/2014
About these service instructions
3
Advertisement
Table of Contents
