Adding Inserts When Copying On Transparency Film; Inserts - Sharp MXC301W Operation Manual

ADDING INSERTS WHEN COPYING ON
TRANSPARENCY FILM
(Transparency Inserts)
When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts
function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the
sheets easy to handle.
It is also possible to copy on the inserts.
1
Place the original.
2
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
3
(2) Touch the [Transparency Inserts] key.
☞
Special modes menu (1st screen)

Inserts

Place the transparency film in the
bypass tray.
• Transparency film can only be placed in the bypass tray.
• Place the transparency film face down on the bypass tray.
When placing a transparency file, place with the rounded
corner at the front and left.
• After loading the transparency film, configure the bypass tray
settings as explained in
BYPASS
(page 2-37)
2-49
"MAKING COPIES USING THE
TRAY" (page 2-34).
COPIER
Contents