Sharp MXC301W Operation Manual page 483

Internet fax mode
The keys explained below can only be used in Internet fax mode. The other keys are the same as those explained in
"Scan mode, USB memory mode, Data entry
Fax/Special Modes Internet Fax/Special Modes
Program
Job
Build
Card Shot
File Quick File
(1) [Transaction Report] key
☞
CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT (Transaction Report)
(page 5-93)
Special modes can generally be combined with other special modes, however, there are some combinations that are not
possible. If a prohibited combination is selected, a message will appear in the touch panel.
[OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as
follows:
(A) Enter the selected special mode setting and return to the base screen.
(B) Enter the selected special mode setting and return to the special mode menu screen. Touch this key when you wish
to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the special mode menu screen without saving the
settings. When settings have been completed, this cancels the settings and returns you to the special mode menu
screen.
mode" (page 5-71).
OK
Erase Timer
1 1
Mixed Size
2 2
Original
Original
Count
(1)
Transaction
Report
Scan/Special Modes
Erase
Edge
Erase
Side Erase
OK OK
Cancel OK
Edge
1/2
(0~1)
inch
5-72
SCANNER/INTERNET FAX
(A)
(B)
(C)
Contents