Copying In The Center Of The Paper (Centering) - Sharp MXC301W Operation Manual

COPYING IN THE CENTER OF THE PAPER (Centering)

This is used to center the copied image on the paper.
This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the
image is reduced.
Not using the centering function
Place the original.
1
Place the original face up in the document feeder tray, or face down on the document glass.
Select the special modes.
(1) Touch the [Special Modes] key.
2
(2) Touch the [Image Edit] key.
☞
[Image Edit] KEY
(1)
Special Modes
Image Edit
3
Photo Repeat
Centering
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then
4
touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first
original.
To cancel scanning and copying...
Press the [STOP] key (
(page 2-79)
(2)
OK
OK
Mirror
Image
B/W
Reverse
).
Using the centering function
Select Centering.
(1) Touch the [Centering] key so that it is
highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the
[OK] key to return to the base screen of copy mode.
2-83
COPIER
Contents