Sharp MXC301W Operation Manual page 114

(1)
2-Sided Copy
3
The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
Color Mode
Full Color
Exposure
Auto
4
Copy Ratio Original
100%
8½x11
5
Up to 999 copies (sets) can be set.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOR START] key or the [BLACK & WHITE START] key.
6
Scanning begins.
Remove the original and place the next original, and then press the [COLOR
START] key or the [BLACK & WHITE START] key.
7
Repeat this step until all originals have been scanned.
For the second original and following originals, use the same [START] key as you did for the first original.
(2)
OK
Binding
Change
Special Modes
2-Sided Copy
Plain
8½x11
Plain Output
8½x11
8½x11
1.
2.
File
3.
8½x11
4. 11x17
8½x11
Quick File
Paper Select
Auto
8½x11
Preview
Plain
7
Special Modes
2-Sided Copy
Plain
8½x11
) and then enter the correct number.
Select the 2-sided copy mode.
(1) Touch the [1-Sided to 2-Sided] key.
(2) Touch the [OK] key.
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the original size, touch the [Original] key.
☞
ORIGINALS (page 2-9)
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
• To change the color mode, touch the [Color Mode] key.
☞
COPY COLOR MODES
Set the number of copies (number of
sets) with the numeric keys.
2-18
COPIER
(page 2-10)
(page 2-20)
Contents