Useable Paper - Sharp MXC301W Operation Manual

Hide thumbs Also See for MXC301W:

Table of Contents

USEABLE PAPER

Various types of paper are sold. This section explains what plain paper and what special media can be used with the

machine. For detailed information on the sizes and types of paper that can be loaded in each tray of the machine, see

the specifications in the Quick Start Guide and

Plain paper, special media

Plain paper that can be used

• SHARP standard plain paper (21 lbs. (80 g/m

• Pain paper other than SHARP standard paper (16 lbs. to 28 lbs. (60 g/m

Recycled paper, colored paper and pre-punched paper must meet the same specifications as plain paper. Contact

your dealer or nearest SHARP Service Department for advice on using these types of paper.

Types of paper that can be used in each tray

The following types of paper can be loaded in each tray.

Plain paper*1

Recycle Paper*1

Heavy paper*

Glossy paper

Transparency film

*1 When receiving a fax, only plain paper/recycled paper from Tray 1/Tray 2 can be used. Bypass tray cannot be used to print a

received fax.

*2 Heavy Paper : 28 lbs. bond to 80 lbs. cover (106 g/m

*3 Thin paper from 13 lbs. bond to 16 lbs. bond (55 g/m

Be sure to use the same paper type as set on the machine. If a different paper type is used, printing output may be smudged.

Settings" (page 7-13) in "7. SYSTEM SETTINGS".

)). For paper specifications, see the specifications in the Quick Start

Trays 1 to 2

) heavy paper

) can be used.

BEFORE USING THE MACHINE

Bypass tray*1

Show Quick Links

Table of Contents