Adding Inserts When Copying On Transparency Film (Transparency Inserts) - Sharp MX-2300N Copier Manual

ADDING INSERTS WHEN COPYING ON
TRANSPARENCY FILM (Transparency Inserts)
When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts
function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the
sheets easy to handle.
It is also possible to copy on the inserts.
1
Full Colour
Colour Mode
Original
Job Detail
Settings
2 Auto
Exposure
100%
Copy Ratio
(1)
Oriented Oriented
horizontally vertically
2-Sided Copy
Auto Auto A4
Paper Select
Plain
A4
Special Modes
Special Modes
(2)
Inserts
Place the transparency film in the
bypass tray.
Place the transparency film face down on the bypass tray.
Transparency film can only be placed in the bypass tray.
When transparency film is oriented horizontally, the rounded
corner should be at the front left. When oriented vertically, the
round corner should be at the rear left.
Open the paper settings screen.
Output
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Paper Select] key.
File
Quick File
85