Change Administrator Password; Product Key; Serial Number; Application Integration Module - Sharp MXC301W Operation Manual

Change Administrator Password

This is used to change the administrator password. Touch the [Change Administrator Password] key to change the
password.
When changing the password, be sure to remember the new password.
It is recommended that you periodically change the administrator password.
Password
Enter the new administrator password (5 to 32 characters).
Password (confirmation)
Enter the new password once again for confirmation purposes.
For the factory default administrator password, see "System settings password" in the Quick Start Guide.

Product Key

The procedures for entering the product keys of the expansion kits are explained below. Touch the [Product Key] key to
configure the settings.
• It may not be possible to use some settings, depending on the peripheral devices installed.
• For the product key to be entered, contact your dealer.

Serial Number

This displays the serial number that is required to obtain
the product key.
Font Kit for Barcode
Enter the product key of the barcode font kit.

Internet Fax Expansion Kit

Enter the product key of the Internet fax expansion kit.
E-mail Alert and Status
Enter the product key of e-mail alert and status.

Application Integration Module

Enter the product key of the application integration
module.
XPS Expansion Kit
Enter the product key of the XPS expansion kit.
7-99
SYSTEM SETTINGS
Contents