Pcl Settings; Postscript Setting - Sharp MXC301W Operation Manual

PCL Settings

This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
Item
PCL Symbol Set Setting
PCL Font Setting
PCL Line Feed Code
Wide A4

PostScript Setting

When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and
whether or not the PostScript data is received in binary format.
Settings
Item
Print PS Error
Binary Processing
Description
Specify the symbol set used for
printing.
Use this to select the font used for
printing.
This setting is used to select how
the printer responds when a line
feed command is received.
When this is enabled, 80
characters per line can be printed
on A4 size paper using a 10-pitch
font. (When this setting is
disabled, up to 78 characters can
be printed per line.)
Description
When a PS (PostScript) error
occurs during PostScript printing,
this setting determines whether or
not an error notice is printed.
Receive PostScript data in binary
format.
7-24
SYSTEM SETTINGS
Selections
Select from 35 items.
• Internal Font
• Extended Font
(List of internal fonts when extended fonts are not
installed.)
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF; LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF; FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF; FF=CR+FF
• (Enabled)
• (Disabled)
Selections
• (Enabled)
• (Disabled)
• (Enabled)
• (Disabled)
Contents