Sharp MXC301W Operation Manual page 153

Turn the ID card over and press the [COLOR START] key or the [BLACK &
WHITE START] key to scan the reverse side of the card.
Use the same [START] key that you used for the front side of the card.
4
To cancel scanning...
Press the [STOP] key (
Place next original. Press [Start].
When finished, press [Read-End].
5
To cancel copying...
Press the [STOP] key (
• The ID card copy function cannot be used at the same time as the 2-sided copy, 2in1/4in1 copy, sort copy, and card shot
functions.Copying is only possible on standard size paper.
• Paper sizes that can be used with ID Card Copy are standard sizes.
• In ID card copy mode, scan area and scan number (1 page) cannot be changed. Scan area is:
X: 86 + 5 mm (1/4") (margin), Y: 54 + 5mm (1/4") (margin).
• Auto tray switch is invalid in ID card copy mode. Please select paper and tray manually
To cancel ID Card Copy...
Touch the [ID Card Copy] key in the screen of step 2 so that it is not highlighted.
).
Touch the [Read-End] key.
Copying will begin.
Read-End
).
2-57
COPIER
Contents