Basic Procedure For Making Copies; Making Copies; Using The Automatic Document Feeder To Make Copies - Sharp MXC301W Operation Manual

BASIC PROCEDURE FOR MAKING
COPIES
This section explains the basic procedures for making copies, including selection of the copy ratio and other copy
settings.

MAKING COPIES

USING THE AUTOMATIC DOCUMENT FEEDER TO
MAKE COPIES
This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.
Indicator
line
1
Color Mode
Full Color
Exposure
Auto
2
Copy Ratio Original
100%
Special Modes
2-Sided Copy
Plain Output
8½x11
File
8½x11
8½x11
Quick File
Paper Select
Auto
8½x11
8½x11
Preview
Plain
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the original size, touch the [Original] key.
☞
ORIGINALS (page 2-9)
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
• To change the color mode, touch the [Color Mode] key.
☞
COPY COLOR MODES
2-11
COPIER
(page 2-10)
(page 2-20)
Contents