MDPs were formerly known as Active Distribution Panels (ADPs).
NOTE
For instructions on mounting MDPs on the expansion cabinet, see the 99x/T-Class
Systems Expansion Cabinet Installation Guide (PN A1809-90006).
Installing DTCs
Distributed Terminal Controllers (DTCs) allow connection of terminals, PCs in terminal
mode, and printers. DTCs are installed in expansion cabinets and are connected to LAN
cards.
1. If you have not already installed the DTC in the expansion cabinets, do so now, using
the 99x/T-Class Systems Expansion Cabinet Installation Guide (PN A1809-90006) that
accompanies the expansion cabinet.
2. Earlier in this manual, the section "Console/LAN Connections" explained how to
connect DTCs to the console/LAN card.
3. For details of configuring the DTC cabinet, interconnect cable or initializing the DTC,
refer to the installation guide supplied with the DTC.
Connecting Other Peripherals
Connect other peripheral devices to the appropriate HP-PB I/O or HP-HSC I/O cards. For
HP-PB configuration information, see Appendix B (Configuring the HP-PB Cardcage) in
this manual or see the CE Handbook (PN A1809-90003).
Chapter 3
Installation
Installing the Remaining Peripherals
3-67