Table of Contents
Advertisement
Configuring the Remote Support Modem
Configuring Individual Modems
CCITT_OM
CCITT_AM
CCITT_BIS_OM
CCITT_BIS_AM
Supported cables:
HP 92219Q - Bell, CCITT_OM, CCITT_AM
A1703-64006 - CCITT_BIS_OM, CCITT_BIS_AM
Auto-dial modes: None
It is best to use this modem in CCITT mode because it causes the Access Port to hang up if
used in Bell mode at 1200 baud. It can be used in Bell mode at 2400 baud, or either 1200 or
2400 in CCITT mode. This modem can not be dialed with either Hayes or V.25BIS
auto-dial protocols.
Settings
Configuration switches on the HP 37212B are on the rear of the modem. See Figure C-2.
Figure C-2
Configuration Switches on the HP 37212B Modem
C-10
Appendix C
Advertisement
Table of Contents
