Table of Contents
Advertisement
Unpacking and Inspection
Unpacking the Cabinet Assembly
6. Remove the two shipping clamps (one on each side) from the bottom of the frame. The
shipping clamps are bolted to the pallet; remove the bolt and then remove the clamp
(items 2 and 3 in Figure 2-3).
Figure 2-3
Removing Door Support and Shipping Clamp
7. Remove the two bolts (item 1 in Figure 2-4), one on each corner, that secure the pallet
shipping block (item 2 in Figure 2-4) at the rear of the pallet. Pull the pallet shipping
block out from under the cabinet.
2-6
Chapter 2
Advertisement
Table of Contents
