Conﬁguring Mpe/Ix For The Powertrust Ups - HP 3000 99x Family Installation Manual

9000 systems t- class

Table of Contents

MPE/iX Conﬁguration and SYSGEN

Conﬁguring MPE/iX for the PowerTrust UPS

If the system has a PowerTrust Uninterruptible Power System (UPS), you should

conﬁgure MPE/iX as described in Chapter 3 (Installation) and in the manual that

accompanies the UPS.

To conﬁgure a PowerTrust UPS, you assign it an LDEV number with NMMGR. Any

LDEVs to be used by UPSs should NOT be deﬁned in the conﬁguration group for the

system; the UPS LDEVs will be added to the conﬁguration by NMMGR.

The default conﬁguration groups leave the LDEV 22 undeﬁned and hence suitable for use

with UPSs.

If you are using more than one PowerTrust UPS, you should assign them additional LDEV

numbers. If the LDEV numbers you choose are currently deﬁned in the conﬁguration

group, you will have to delete them using SYSGEN. Follow the procedure given at the

beginning of this appendix.

If you are adding a UPS to an existing 990/992/890 system, you will also have to delete

LDEV numbers from the conﬁguration using SYSGEN.

Appendix A

A-5

Table of Contents