Table of Contents
Advertisement
Quick Links
H P
3 0 0 0 B u s i n e s s S e r v e r s
HP SNA Services (30292B):
- SNA NRJE Network Remote Job Entry
- SNA IMF/iX Interactive Mainframe Facility
- LU 6.2 Application Programming Interface
- SNA Distributed Host Command Facility/iX
SNA NRJE Network Remote Job Entry
This paragraph describes System Network Architecture
Network Remote Job Entry (SNA NRJE) for both the
MPE V (SNA NRJE/V) and MPE/iX (SNA NRJE/iX)
operating systems. The term SNA NRJE is used to refer
to both SNA NRJE/V and SNA NRJE/iX. The terms SNA
NRJE/V and SNA NRJE/iX are used when a distinction is
necessary.
SNA NRJE/V on the HP 3000 Series 37-70 or SNA
NRJE/iX on the HP 3000 Series 900 provides enhanced
batch data communications between the HP 3000 and an
IBM Systems/370-compatible mainframe in a System
Network Architecture (SNA) environment. SNA NRJE
emulates the major features of an IBM 8100 DPPX/RJE
workstation using an SNA Physical Unit Type 2 (PU 2),
Logical Unit Type 1 (LU 1) device.
IBM Host Processor
Communications
Modem
~ ~
9600 bps
Modem
IBM 8100
DPPX/RJE
Printers
Card Readers
RJE Console
Disks
Magtapes
MVS/SP
VSE
JES2 or JES3
VSE/POWER
or
ACF/VTAM
ACF/VTAM
Controller
Modem
Up to 56 Kbps for MPE/V,
~ ~
and 64 Kbps for MPE/iX
Switched
or Leased
Modem
HP 3000 V or iX
SNA NRJE
and SNA Link
Card Readers
Terminals
Magtapes
~ ~
HP 3000
N e t w o r k i n g
Features
• SNA NRJE is able is able to
communicate with JES2, JES3, and
VSE/POWER host job entry subsystems.
• Automatically route job output based
on destinations selected by the user at
the time of job submittal - "Job
Management"
• Automatically route output based on
user-selected IBM host forms - "Output
Management"
• Process batch jobs originated by a user
on an IBM Mainframe - "Reverse NRJE"
• Provide Native Languages Support - for
data only. NLS 16-bit character
mapping; interactive and programmatic
access; and data integrity are not
supported for languages such as
Japanese, Korean, Simplified Chinese,
and Traditional Chinese.
• Host output can be sent to any
supported output device on an HP
3000 such as disk files, tape files,
printers, or user-written programs.
• Multiple HP 3000 users can
concurrently access the host for batch
processing.
• Jobs are submitted into the
transmission queue independent of the
line status.
• Users can submit jobs and receive
output without operator intervention.
• Other HP 3000 applications run
concurrently with SNA NRJE.
• SNA NRJE can share an SNA link with
other HP SNA service products.
• Customizable error and help message
facilities are provided.
• Host console commands can be sent
and host console data can be received.
• Data compression and character code
translation are configurable.
Disks
• SNA NRJE and SNA Link support
communications at up to 56 KB/s on
Printers
MPE V and 16 MB/s on MPE/iX.
• SNA NRJE can take advantage of
Laser Printers
SNA/SDLC Link's Auto-dial capability.
Printer
HP 3000
Bus ness
Servers
Advertisement
Table of Contents
Related Manuals for HP 30292B
Summary of Contents for HP 30292B
- Page 1 Traditional Chinese. • Host output can be sent to any SNA NRJE/V on the HP 3000 Series 37-70 or SNA supported output device on an HP NRJE/iX on the HP 3000 Series 900 provides enhanced 3000 such as disk files, tape files, batch data communications between the HP 3000 and an printers, or user-written programs.
-
Page 2: Functional Description
Similarly, job output is held at the host and lower three layers of SNA and provides sent to the HP 300 when the line connection physical connectivity to the IBM host via is made. -
Page 3: Product Requirements
• Job Entry Subsystem: JES2 or JES3 3000 attached to the IBM) to start a job on an running under HP 3000 if SNA NRJE on the HP 3000 is – Operating System: MVS active. • Job Entry Subsystem: VSE/POWER... -
Page 4: Functional Specifications
Please refer to the Network Support data sheets in this guide for SNA NRJE/V Product Requirements more information on these services. • An HP 3000 Series 37-70 and MPE V operat- ing system Customer Responsibility • HP 30246A SNA Link/V... -
Page 5: System Environment
• Updating the HP 3000 system to the proper HP effort spent on problems that are not release level and installing the SNA NRJE caused by HP installation and configuration software using AUTOINST. Refer to the activities is considered HP Consulting Support... - Page 6 MPE V systems.) SNA/SDLC Link/iX or SNA/X.25 Link/iX. The maximum datacomm line speed is SNA IMF/iX on an HP 3000 Series 900 allows interactive 64 KB/s. communications between the HP 3000 and an IBM • SNA IMF/iX supports up to 127 devices...
- Page 7 Korean, Simplified Chinese, and Traditional Chinese. SNA IMF/iX is a software product that allows an HP 3000 and attached devices to emulate the base • SNA IMF/iX supports IBM applications function set of an IBM 3274 control unit and attached...
- Page 8 It causes modified data to be transmitted to the host the next time the host polls the device. VERS3270 Returns the number if the version of SNA IMF/iX that is being executed in the HP 3000. WRITEFIELD Writes data from the HP application program into an unprotected field if the internal screen buffer.
- Page 9 HP function keys. FIELD MARK, TEST REQ, No equivalent on HP For HP terminals being used in the Pass Thru CURSOR BLINK, ALT terminals CURSOR, IDENT, DEV mode, the response time will be longer than CNCL, DUP, CLOCK, PRINT...
- Page 10 NOT supported. Release 4.0 or later. • The HP 700/94 terminal is recommended for • The HP 700/94, HP 2394A, HP 150, HP use with SNA IMF/iX in Pass Thru mode as 700/92, and HP 2392A terminals support a it offers the greatest performance and func- 19.2 KB/s connection to the HP 3000.
- Page 11 SNA IMF/iX in a particular network. the same time. • SNA IMF/iX Product Requirements • Updating the HP 3000 system to the proper – HP 3000 Series 900 computer system release level and installing the SNA IMF/iX – HP 30291B SNA/SDLC Link/iX software using AUTOINST.
-
Page 12: Support Products
HP 3000 system and personnel with the HP 3000 system management knowledge are available when SNA IMF/iX is available on all HP 3000 Series HP is onsite to complete the minimum con- 900 systems with currently supported releases figuration of SNA IMF/iX. - Page 13 API/iX are used when a distinction is necessary. • Compatibility with Other SNA Services HP LU 6.2 API/V on an HP 3000 Series 37 through 70 or • Trace Facility HP LU 6.2 API/iX on an HP 3000 Series 9xx provides HP •...
- Page 14 HP 3000 and the IBM mainframe host is • Peer-to-peer Connectivity: With MPE/iX 56 KB/s on MPE V and 16 MB/s on MPE/iX.
- Page 15 LU 6.2 API intrinsics are summarized in the Functional Description following table. HP LU 6.2 API provides a set of high-level LU 6.2 API Intrinsics Summary intrinsics for application programmers to use Intrinsics Function for program-to-program communication MCALLOCATE Establishes a mapped conversation between an HP 3000 application program and between two TPs.
- Page 16 MPE/iX. The SNA/SDLC Link/iX Requirements for IBM mainframe hardware product (30291A), SNA/Token Ring Link/iX and software are the same for both HP LU 6.2 product (J2167B) or the SNA/X.25 Link/iX API/V and HP LU 6.2 API/iX. product (36939B).
- Page 17 HP LU 6.2 API into the existing customer network. Documentation HP Responsibility For both HP LU 6.2 API/V and HP LU 6.2 API/iX: • J2220-61025 HP SNA Products Remote Following the installation of HP LU 6.2 API, System Configuration Guide HP is responsible for the following: •...
- Page 18 (simple ASCII) applications and users who use IBM 3270 display stations with interactive many VPLUS applications. access to an HP 3000 Series 900 system. Together with • VPLUS has been optimized for the IBM Host Command Facility (HCF Version 2) product applications used with SNA DHCF/iX;...
-
Page 19: Usage Considerations
Functional Description and are ready to be compiled, the applications designer will select the “IBM 3270” box in the HP SNA DHCF/iX is a software product that Terminal Selection Menu of FORMSPEC, in provides an IBM 3270 display station with addition to any HP terminal options normally access to applications on an HP 3000. - Page 20 If the target application violates any of these mode or block-mode features that are specific restrictions, then it is not supported by SNA to HP terminals are not supported. Some of DHCF/iX. An error condition will be returned these restrictions include: to the application when an unsupported feature is used.
- Page 21 • Using an HP 3000 Series 900 and SNA HP will support certain versions and later DHCF/iX as a gateway system, IBM 3270 releases of the above software. Your HP display stations can access only TTY-mode support representatives must determine...
-
Page 22: Ordering Information
SNA DHCF/iX unless SNA Link will be installed at the same time. For implementation needs that go beyond • Updating the HP 3000 system to the proper installation, the customer can either provide release level and installing the SNA self-support or can purchase additional DHCF/iX software using AUTOINST. - Page 23 For more information, contact your HP Sales Representative, or refer to the HP data sheets for specific support services. Documentation The following documentation is for SNA DHCF/iX: •...
- Page 24 For additional information please contact any of our For direct country contact call: worldwide sales offices or HP Channel Partners. Argentina: +541 787 7145 For the location of the nearest sales office call: Austria: +43 1 25 000 0 United States of America:...