Clutch Unit; Clutch Housing-Friction Disc Clearance; Clutch Spring - Husqvarna 2009 TE 310 Workshop Manual

ENGINE OVERHAULING

Clutch unit

Check that all clutch unit components are in good condition. The clutch discs
should not be burnt or scored. Check the thickness of the clutch lining discs.
Thickness of new plate: 0.118 in.
Check the distortion of each plate (both lined and unlined) by resting on a flat
surface; use a feeler gauge.
Wear limit: 0,2 mm (0.00078 in.).

Clutch housing-friction disc clearance

STANDARD
0,30÷0,50 mm
(0.012÷0.020 in.)

Clutch spring

Check the free lenght "L" of each spring with a gauge.
New spring: L= 1.61 in. Wear limit: 1.53 in.
Replace any spring which does not meet with this specification.
G.18
Wear limit: 0.114 in.
WEAR LIMIT
0,6 mm
(0.024 in.)
Part. N. 8000 H0368 (09-2008)