Rear Tail Light Bulb Replacement - Husqvarna 2009 TE 310 Workshop Manual

ELECTRIC SYSTEM, DIGITAL INSTRUMENT

Rear tail light bulb replacement

To gain access to the tail light bulb (12V-5/21W), proceed as follows:
- remove the two fastening screws (1) and the rear lens (2);
- pull the lamp (3) inside, turn it counterclockwise then remove it from the lamp
holder.
After replacement, reverse operations for reassembly.
Make sure not to tighten the screws excessively.
Part. N. 8000 H0368 (09-2008) M.31