Husqvarna 2009 TE 310 Workshop Manual page 90

1
4
9
5
6
5
7
GENERAL OPERATIONS
3) SMR: use an 8 mm T-wrench outside and a 10 mm T-wrench inside to remove
the fastening screw (1) of silencers (3) and (4). Remove the spring (2) and extract
3
silencers (3) and (4). Remove the clamps (A) that the hold front pipes (6) and (7)
to the intermediate pipe (8).
1
3) TE-SMR: remove the LAMBDA probe (A). Remove the intermediate pipe (8).
A
Remove the springs (9) and remove pipes (6) and (7) from the cylinder head by
gently hitting outward.
8
3
4
2
5
9
7
6
5
E.22
2
8
Part. N. 8000 H0364 (09-2008)