Crankshaft And Counter Balancing Shaft Disassembly (Smr 450-510) - Husqvarna 2009 TE 310 Workshop Manual

ENGINE DISASSEMBLY

Crankshaft and counter balancing shaft disassembly (SMR 450-510)

Place the puller bushing on the R.H.S. of the crankshaft.
Fix the puller on the crankcase half and push out th crankshaft (strike lightly the
layshaft with a rubber hammer in order to avoid it from getting stuck).
F.24 Part. N. 8000 H0368 (09-2008)