32/CLUTCH
Checking the fluid level of hydraulic clutch
19.1
Info
The fluid level rises with increasing wear of the clutch lining disc.
Do not use brake fluid.
Changing the hydraulic clutch fluid
19.2
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc., according to regulations.
Info
The fluid level rises with increasing wear of the clutch lining disc.
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
–
Check the fluid level.
Fluid level under top level of container
»
If the level of the fluid does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
700419-01
Hydraulic fluid (15) (
–
Position the cover with the membrane. Mount and tighten the screws.
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws
–
Remove cover
300669-10
–
Fill bleeding syringe
Bleed syringe (50329050000) (
Hydraulic fluid (15) (
–
On the slave cylinder, remove the bleeder screw and mount bleeding syringe
300670-10
–
Inject the liquid into the system until it escapes from drill hole
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level under top level of container.
–
Position the cover with the membrane. Mount and tighten the screws.
300671-10
.
with membrane
.
4 mm (0.16 in)
p. 120)
.
with membrane
.
with the appropriate hydraulic fluid.
p. 126)
p. 120)
4 mm (0.16 in)
95
.
of the master