30/DISASSEMBLING THE ENGINE
Removing the cylinder head
15.6
–
Remove nut
Info
If the shaft of the exhaust control turns, raise the diaphragm and hold the
shaft in place.
–
Remove the diaphragm.
300749-10
–
Remove screws
–
Remove the reed valve housing of the exhaust control.
300750-10
–
Remove spring
300751-10
–
Remove O-rings
300752-10
–
Alternately loosen screws
–
Take off the cylinder head.
300753-10
–
Remove the cylinder head gasket.
–
Remove the dowel pins.
300754-11
.
.
.
.
and remove them.
51