SERVICE SCHEDULE
Important maintenance work to be carried out by an authorized KTM workshop. (as additional order)
33.2
Check/set the carburetor components. (
Check intake membrane for wear.
Check wear of the clutch lining disc.
Check clutch spring length.
Check cylinder and piston for wear.
Check exhaust control for functioning and smooth operation, clean.
Check the seating of the piston pin.
Check main bearing of the crankshaft.
Check radial clearance of conrod bearing.
Change crankshafts and conrod bearings.
Fully check the transmission.
Carry out a complete fork service.
Carry out a complete shock absorber service.
Clean and lubricate swingarm bearing.
Grease the steering head bearing. (
Change the glass fiber yarn filling of the main silencer. (
Change the hydraulic clutch fluid. (
Change the front brake fluid.
Change the rear brake fluid.
S20A: Every 20 service hours
S40A: Every 40 service hours
J1A: annually
p. 91)
p. 13)
p. 23)
p. 95)
117
S20A
S40A
J1A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•