30/DISASSEMBLING THE ENGINE
Clamping the engine into the engine work stand
15.1
Removing the clutch pressure piece
15.2
Removing the oil drain plug
15.3
Removing the spark plug
15.4
Removing the exhaust control
15.5
–
Mount special tool
Engine work stand (61229001000) (
Holder of engine work stand (46229001070) (
–
Mount the engine.
Screw connection for engine work stand (46229001060) (
300744-10
–
Remove the clutch pressure piece
300770-10
–
Remove the oil drain plug with magnet
–
Completely drain the gear oil.
300746-10
–
Remove spark plug
Spark plug wrench (60029073000) (
300747-10
–
Remove screws
–
Take off the diaphragm cover of the exhaust control.
300748-10
on engine work stand
p. 128)
.
and the seal ring.
.
p. 128)
.
.
p. 124)
p. 124)
50