30/DISASSEMBLING THE ENGINE
Removing the stator
15.14
Removing the kickstarter
15.15
Removing the water pump cover
15.16
Removing the clutch cover
15.17
Removing the outer clutch hub
15.18
–
Remove cable support sleeve
–
Remove screw
–
Take out the stator.
300769-10
–
Remove screw
–
Take off the kickstarter.
300771-10
–
Remove screws
–
Take off the water pump cover.
–
Remove the gasket and dowels.
300773-10
–
Remove screws
Info
Ensure that the kickstarter shaft remains in the engine case.
–
Remove the dowels and clutch cover gasket.
300772-10
–
Hold the clutch in place with special tool
Clutch holder (49012003000) (
–
Remove screw
–
Remove the clutch pack.
300775-10
out of the engine case.
.
with the washer.
.
. Take off the clutch cover.
p. 126)
.
.
54