08/MASK, FENDER
Dismounting the front fender
10.1
Installing the front fender
10.2
Dismounting the start number plate
10.3
Installing the start number plate
10.4
–
Remove screws
700414-10
–
Position the fender with holding lugs
plate.
700415-01
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
700414-11
–
Remove screw
–
Remove screw
700412-10
–
Position the start number plate with the drill holes onto the holding lugs
fender.
700413-01
. Remove the front fender.
into the drill holes on the start number
M6
and take off clamp.
. Remove the start number plate.
.
10 Nm (7.4 lbf ft)
of the
28