31/CARBURETOR
Checking/setting the carburetor components
18.5
–
Disassemble the carburetor. (
–
Check the jet needle. (
–
Check the throttle slide. (
–
Check the float needle valve. (
–
Check the choke slide. (
–
Assemble the carburetor. (
Checking the jet needle
18.6
–
Position the jet needle with the spring retainer in the throttle slide.
–
Mount and tighten screws
–
Install the carburetor. (
300878-10
p. 87)
p. 91)
p. 92)
p. 92)
p. 92)
p. 89)
Condition
The jet needle has been removed.
–
Check the jet needle for bending and wear of the coating.
»
If the jet needle is bent, or the coating is damaged or worn:
–
–
Check the needle clip for tightness.
»
If the needle clip is loose:
–
300877-10
.
p. 86)
Change the jet needle.
Change the needle clip or jet needle.
91
300881-01