Selecting A Folding Setting; Folding Copies In Half ("Half-Fold" Setting) - Oce cm3522 User Manual

Basic copy operations
2.13

Selecting a folding setting

By installing optional equipments, copies can be folded, or folded and bound with staples at the same time,
and then fed out. Available settings differ depending on the optional equipments installed.
Setting
Half-Fold
Center Staple & Fold
Note
Copies can be folded in half and bound at the center only if finisher 9355 is installed or finisher 9356 is
installed with the saddle stitcher attached.
Copies can be folded in half only if finisher 9356 is installed with the saddle stitcher attached.
2.13.1

Folding copies in half ("Half-Fold" setting)

When Finisher 9356 is installed with the saddle stitcher attached
Paper weight
16 lb to 24 lb
Number of sheets folded in half
Examples of the possible number of sheets folded in half are listed below.
- 2 to 15 sheets of 24 lb paper (maximum of 60 pages)
!
Detail
In order for copies to be bound at the center or folded in half, all of the following conditions must be met.
The paper width must be between 7-1/4 lnch and 11-3/4 inch.
The paper length must be between 10 inch and 17 inch.
Océ cm3522/cm2522
Description
Select this setting to fold copies in half before feeding them out.
(Refer to page 2-70.)
Select this setting to staple copies at two places along
the center, then fold the copies in half before feeding them out.
(Refer to page 2-72.)
Paper size
8-1/2 × 11 w, 11 × 17 w
Compatible models
Finisher 9356 +
Saddle stitcher
Finisher 9356 +
Saddle stitcher
Finisher 9355
Maximum number of bound sheets
200 sheets or 20 sets
2
2-70