Clearing All Mykeys - Ford EVEREST 2015 Owner's Manual

Programming/Changing
Configurable Settings
Use the information display to access your
configurable MyKey settings by doing the
following:
Message
Settings
MyKey
Note: You can clear or change your MyKey
settings at any time during the same key
cycle as you created the MyKey. Once you
have switched the vehicle off, however, you
will need an admin key to change or clear
your MyKey settings.
Note: When you make any changes to your
MyKey settings, you change the settings for
every MyKey. You cannot make individual
changes to apply to certain MyKeys.
To clear all MyKeys of all MyKey settings, press the left arrow button to access
the main menu and scroll to:
Message
Settings
MyKey
Clear MyKey
All MyKeys
Cleared
Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to
their original admin key status.
Everest (TEC), EB3B-19G219-YAA enAUS
MyKey
1.
2. Use the arrow buttons to get to the
Press the OK button or the right arrow
button.
Press the OK button or the right arrow
button.

CLEARING ALL MYKEYS

You can clear or change your MyKey
settings using the information display
control on the steering wheel. See
Information Displays (page 70).
Switch the ignition on using an admin key
or remote control.
Action and Description
Press the OK button.
Press the OK button.
Press and hold the OK button until the following message
displays.
34
Switch the vehicle on using an admin
key.
following menu selections:
Action and Description