Changing The Engine Air Filter - Ford EVEREST 2015 Owner's Manual

Table of Contents

Advertisement

CHANGING THE ENGINE AIR
FILTER
WARNING
To reduce the risk of vehicle damage
and personal burn injuries, do not
start your engine with the air cleaner
removed and do not remove it while the
engine is running.
When changing the air filter element, use
only the air filter element listed.
When servicing the air cleaner, it is
important that no foreign material enter
the air induction system. The engine and
turbocharger are susceptible to damage
from even small particles.
Change the air filter element at the proper
intervals.
Note: Failure to use the correct air filter
element may result in severe engine
damage. Resulting component damage may
not be covered by the vehicle Warranty.
2
1
E197418
1.
Release the clamps that secure the air
filter cover to the housing.
Everest (TEC), EB3B-19G219-YAA enAUS
Maintenance
2. Carefully lift the air filter housing cover.
Take care to avoid other surrounding
components while lifting.
3. Remove the air filter element from the
air filter housing.
4. Wipe any dirt or debris from the air filter
housing and cover to make sure no dirt
gets in the engine and that you have a
good seal.
5. Install a new air filter element. Be
careful not to crimp the filter element
edges between the air filter housing
and cover.
6. Install the air filter housing cover.
7.
Engage the clamps to secure the air
filter housing cover to the air filter
housing.
243

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents