Transmission; Automatic Transmission; Selector Lever Positions - Ford EVEREST 2015 Owner's Manual

AUTOMATIC TRANSMISSION

WARNING
Always set the parking brake fully
and make sure you move the
transmission selector lever to park.
Switch the ignition off and remove the key
whenever you leave your vehicle.

Selector lever positions

2
E132720
P Park
R Reverse
N Neutral
D Drive
S Sport mode and manual shifting
S+ Manual shift up
S- Manual shift down
WARNING
Apply the brakes before moving the
selector lever and keep them applied
until you are ready to move off.
Everest (TEC), EB3B-19G219-YAA enAUS

Transmission

Note: A cold engine has a higher idle speed.
This will increase the tendency for your
vehicle to creep when you have selected a
drive gear.
Press the button on the transmission
selector lever to select reverse and park.
The transmission selector lever position
will be shown in the instrument cluster
display.
P (Park)
Move the transmission selector lever
to park only when your vehicle is
1
stationary.
Apply the parking brake and move
the transmission selector lever to
park before leaving your vehicle.
Make sure that the transmission selector
lever is latched in position.
In this position, power is not transmitted
to the drive wheels and the transmission
is locked. You can start the engine with the
transmission selector lever in this position.
Note: To move the selector lever from the
park position, apply the footbrake with
ignition key in position II.
Note: An audible warning will sound if you
open the drivers door and you have not
moved the transmission selector lever to
park.
Note: The battery saver will deactivate the
audible warning after a period of time.
R (Reverse)
Move the transmission selector lever
to reverse only when your vehicle is
stationary and the engine is at idle
speed.
130
WARNINGS
WARNINGS